ROTEX-SN Technical Features
- Single Packing
- Cartridge type
- Balanced
- Independent of Rotation
Operating Limits
- Shaft Diameter : d1= 6…38 mm
- Pressure : p1 = 10 bar
- Temperature : t = -20 … + 140 °C
- Speed: vg = 15 m/s
- Axial Movement : ± 1.0 mm
Working limits
- Shaft Dimension: d1=25…100 mm
(Other dimensions upon request) - Temperature:t=-40…220 °C
- For Car/SiC surface combination:
Pressure:p1=25 bar
Peripheral Velocity:Vg=16 m/ s - For SiC/SiC and TuC/SiC surface combination:
Pressure: p1=12 bar
Peripheral Velocity: Vg=10 m/s - Axial Movement: ±1.0 mm, d1 ≥ 75 mm ±1.5 mm
Advantages
- Ideally Used in Standard Pump Processes -Ideal Seals for Standardization
- In Centrifugal Pumps, Shaft is Protected from Damage by Dynamically Loaded O-Ring
- Long Lifetime Use
- Installation and Assembly Errors are Prevented
- Low Operating Cost
- Dirt and Dust Cannot Damage the Seal During Installation
- Pre-Installed Thanks to the Packing Group, It Provides Simple and Easy Installation and Time Losses During Installation Are Reduced
- Customer-Specific Designable System